How to install a deadbolt lock
How to Install a Deadbolt Lock
Tools Needed
- Deadbolt lock
- Phillips head screwdriver
- Drill
- Drill bits
- Measuring tape
Installing The Deadbolt Lock
- Measure and mark the spot for the deadbolt.
- Drill two holes, one for the deadbolt cover and one for the deadbolt.
- Insert the deadbolt cover and secure with Phillips head screws.
- Insert the deadbolt into the hole and secure with Phillips head screws.
- Align the stem of the deadbolt to the bolt cover.
- Turn the key to test if the deadbolt works properly.
- Once the deadbolt is secure, remove the key and you’re done!
What tools are needed to install a deadbolt lock?
-Phillips Head Screwdriver
-Flathead Screwdriver
-Power Drill and Appropriate Bits (if needed)
-Measuring Tape
-Deadbolt Lock and Necessary Installation Hardware (screws, anchors, etc.)
What type of screws are needed to install a deadbolt lock?
A #3 phillips head screw is usually recommended to install a deadbolt lock.
What size screw is needed to install a deadbolt lock?
The size of the screw depends on the type of deadbolt lock you are installing. Generally, you should use a #10 or #12 wood screw with at least two inches of length.